Related Experiment Video
Updated: Mar 29, 2026

Kinematic History of a Salient-recess Junction Explored through a Combined Approach of Field Data and Analog Sandbox Modeling
Published on: August 5, 2016
Configurational Stability and Mobilizable Oil Release Behavior of a Multiscale Gel-Particle Cooperative Nested System
Baoli Liu1, Bin Lü2, Yishun Wang2
1Second Gas Production Plant of Yanchang Gas Field, Shaanxi Yanchang Petroleum (Group) Co., Ltd., Yulin 718500, China.
None:
The configurational stability and mobilizable oil release behavior of a multiscale gel-particle cooperative nested system within tight sandstone pore structures were systematically investigated. Scanning electron microscopy (SEM), atomic force microscopy (AFM), and μCT-based three-dimensional reconstruction were employed to characterize the multiscale structural features of the system. Interfacial regulation behavior was analyzed using contact angle measurements, oil-water interfacial tension (IFT), and zeta potential tests, while core flooding experiments were conducted to evaluate seepage response and oil displacement performance. The results indicate that particle reinforcement transforms the gel pore walls from a weakly rough interface into a strongly rough and mechanically interlocked structure, with the root-mean-square surface roughness increasing from 23.6 nm to 71.4 nm. μCT quantitative analysis shows that the pore volume fraction increases from 38.6% to 52.4%, and the connectivity ratio rises from 41.2% to 68.5, leading to the formation of a more continuous pore-throat network. Interfacial property measurements reveal that the rock surface contact angle decreases from 116.3° to 60.5°, and the oil-water interfacial tension is reduced from 27 mN·m-1 to 3-5 mN·m-1. Meanwhile, the system-rock interface exhibits a stronger overall negative surface charge. During displacement experiments, the pressure differential at 3.0 pore volumes (PV) is only 17.0 kPa, significantly lower than that of the control gel (26.2 kPa). The oil recovery is increased to 44.8%, while the residual oil saturation decreases from 0.46 to 0.32, and the displacement efficiency improves from 36.1% to 55.6%. These results demonstrate that the multiscale gel-particle cooperative nested system establishes a stable, regulated seepage configuration in tight sandstone and enables sustained mobilization of trapped oil under relatively low-pressure gradients through the coupled regulation of wettability, interfacial tension, and interfacial electrostatics. This study elucidates a coupled mechanism of configurational stability-flow channel redistribution-continuous oil mobilization and provides a new material design and regulation strategy for efficient recovery of residual oil in tight reservoirs.
More Related Videos
11:38Combining Microfluidics and Microrheology to Determine Rheological Properties of Soft Matter during Repeated Phase Transitions
Published on: April 19, 2018
08:38Microfluidic Devices for Characterizing Pore-scale Event Processes in Porous Media for Oil Recovery Applications
Published on: January 16, 2018
Related Concept Videos
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...
Stability of Equilibrium Configuration: Problem Solving
Problem-solving in the context of the stability of equilibrium configuration...
Entropy and Solvation
Porosity in Cement Paste
The balance of water to cement in the mix is...
Stability of Equilibrium Configuration
A stable equilibrium occurs when a system tends to return to its original position when given a small displacement, and the potential energy is at its minimum. An example of a stable equilibrium is when a cantilever beam is fixed at one end and a weight is attached to the other end. If the weight...