Related Experiment Video
Updated: Apr 9, 2026

Preparation and Friction Force Microscopy Measurements of Immiscible, Opposing Polymer Brushes
Published on: December 24, 2014
A Multi-scale Interfacial Investigation of Organic Friction Modifiers in Hydrocarbon
David Burgess1,2, Peter J Fryer1, Ian McRobbie2
1School of Chemical Engineering, University of Birmingham, Edgbaston, Birmingham, UK.
Abstract:
To link molecular characteristics and lubrication performance of Organic Friction Modifiers (OFMs), a multi-scale study was carried out to investigate the effects of functional groups and solvents on the tribological properties of two model OFMs, namely palmitic acid and pentadecylamine. It was observed that the solvent composition has a profound effect on the surface adsorption and the interfacial adhesion force of the OFMs, showing vastly different values of adsorption kinetics and surface coverage. It must be highlighted that the presence of water within the hydrocarbon has a considerable impact on the lubrication performance of OFMs. We were able to quantitatively correlate the molecular properties such as binding force and adsorption kinetics of the OFM with their macroscopic testing results satisfactorily, suggesting that the static Coefficient of Friction (COF) is governed by the properties of the film formed in a thermodynamic equilibrium, whilst the dynamic COF is related to the interfacial forces at the surface during sliding, and finally the wear on the solid surface is related to ability of the OFMs to rapidly re-adsorb on the solid substrate once removed.
Related Concept Videos
Intermolecular Forces and Physical Properties
Dry Friction
To illustrate this concept, imagine a wooden crate resting on a rough, non-uniform horizontal surface. When an external force is applied to...
Frictional Force
Comparing Intermolecular Forces: Melting Point, Boiling Point, and Miscibility
Temporary attractive forces like dispersion are present in all molecules, whether they are polar or nonpolar. They...
Characteristics of Dry Friction
Before the wheelbarrow starts moving, the static frictional force acts tangentially to the contact surface, opposing the force that is about to induce the motion. This frictional force prevents the...
Surface Active Agents

