Hydrothermal Conversion of Annatto Seed Waste (Bixa orellana) into Functional Hydrochar: Synthesis, Characterization,...

Agroindustrial residues represent an abundant and underutilized source of carbon-rich materials for environmental remediation. In this study, annatto processing waste (Bixa orellana), a largely unexplored lignocellulosic by-product generated during pigment extraction, was converted into hydrochar via hydrothermal carbonization at 200 °C for 3 h. The resulting hydrochar (HC-AW) exhibited a predominantly amorphous carbon structure with retained oxygen-containing surface functionalities, and a solid yield of 44%, indicating efficient biomass conversion under subcritical conditions. Adsorption performance toward tetracycline was evaluated through pH-dependent experiments, kinetic modeling, equilibrium isotherms, and thermodynamic analysis. Maximum adsorption occurred under near-neutral conditions (pH ≈ 7), consistent with the interplay between tetracycline speciation and the hydrochar surface charge (pH_PZC ≈ 6.3), highlighting its potential applicability under realistic water treatment conditions without pH adjustment. Kinetic data were well described by the pseudo-second-order model, while equilibrium results were best fitted by the Langmuir model, with a maximum adsorption capacity of 14.94 mg g^-1 at 30 °C. Thermodynamic analysis indicated a spontaneous and slightly endothermic adsorption process. Overall, the results highlight the potential of annatto-derived hydrochar as a low-cost adsorbent and provide insight into the relationship between surface properties and adsorption behavior governing antibiotic removal from aqueous systems.