Related Experiment Video
Updated: Apr 15, 2026

Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for CuII Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Ordered Mesoporous Carbon Modified with L-Arginine for Pb(II) Enrichment in Water Quality Control from Urban Roof
Rafał Olchowski1, Agnieszka Chałabis-Mazurek1, Ryszard Dobrowolski2
1Department of Pharmacology, Toxicology and Environmental Protection, Faculty of Veterinary Medicine, University of Life Sciences, Akademicka Sq. 12, 20-950 Lublin, Poland.
Abstract:
Hexagonally ordered mesoporous carbon was ozonized, and the oxidized carbonaceous material was modified with L-arginine. The ozonized and L-arginine-modified carbons were extensively characterized and tested as Pb(II) ion adsorbents, with optimization of Pb(II) solution pH, exposure time, Pb(II) ion concentration and the presence of concurrent ions. Pb(II) adsorption equilibrium was achieved within 5 min at optimal pH = 2.6 or 5.3 for the oxidized and L-arginine-modified carbonaceous materials, respectively. The adsorption kinetics of both investigated materials were best described by the pseudo-first-order model. The maximum adsorption capacity for Pb(II) ions was determined to be 16 mg g-1 (ozonized material) or 45 mg g-1 (L-arginine-modified material). The Langmuir model provided the best fit for the adsorption isotherm data. Fe(III) ions mostly hindered the Pb(II) adsorption (up to 60%) on the L-arginine-modified carbon material. L-arginine-modified carbon was used to enrich Pb(II) from simulated urban roof runoff and its determination using the slurry sampling high-resolution continuum-source graphite furnace atomic absorption spectrometry technique. The developed analytical procedure was characterized by a limit of quantification of 2.63 µg L-1, an enrichment factor of 50, and a recovery rate of 94.8%.
More Related Videos
08:01Removal of Arsenic Using a Cationic Polymer Gel Impregnated with Iron Hydroxide
Published on: June 28, 2019
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015