Screw Withdrawal Resistance from WPC Profiles Used in Door Frame Production

This study investigates the screw withdrawal resistance (SWR) of hollow wood-plastic composite (WPC) door frames, which serve as moisture-resistant alternatives to traditional wood-based materials. The tested WPC, characterised by a density of 1.33 g/cm³ and a polymer-bound lignocellulosic filler, exhibits superior dimensional stability and low water absorption-under 4% after 24 h of immersion. The research focuses on how the unique chambered geometry of these industrial profiles affects the anchoring of 20 mm conical wood screws used to mount essential fittings such as hinges and lock catches. The SWR was determined using a universal testing machine in accordance with the modified EN 320 standards. Results indicate that the installation location within the profile significantly dictates load-bearing capacity: the band profile (lock catch) achieved an average SWR of 525.65 N, while the beam profile (hinge) averaged only 275.25 N. This performance gap arises because screws anchor only into internal "ribs" rather than the full material depth. Since these values are considerably lower than those of traditional particleboard (~1364-1775 N), the study highlights a critical need to optimise screw dimensions to ensure the structural stability and safety of hollow WPC door systems.