Composites from Recycled Polyolefin and Waste Plant Biomass with Potential Uses in Electrical Insulation Applications

This research investigates novel polymeric composite materials made from recycled polyolefin and waste plant biomass (poplar seeds and vegetable peels), which have potential applications in the relatively unexplored field of electrical insulation. For composites made from poplar seeds with low density polyethylene matrix, the structure appears more uniform, even with increased biomass content, in contrast to those utilizing high density polyethylene matrix, which displays notable heterogeneous areas where the polymer appears separated from the fibrous network at higher biomass levels. Concerning the composites of vegetable peels with high density polyethylene matrix, the fragments of vegetable peels are clearly recognizable, and their bond to the polymer matrix appears weaker. When incorporating vegetable peels into the polypropylene matrix, it results in a better distribution of the vegetable peel fragments within the polymer matrix, as well as enhanced structural homogeneity. Overall, the incorporation of biomass reduces the Shore hardness measurement for every polymer matrix. Regarding tear resistance, the inclusion of biomass reduces the values only for low density polyethylene with poplar seeds. For both high density polyethylene and polypropylene, regardless of the biomass type, the property seems to enhance marginally with the addition of biomass. The primary advantage of utilizing these composites is that their water absorption rate is at least twice as low as that of transformer board, while still offering a similar capacity for absorbing transformer oil. All composite types exceeded the minimum required threshold of 70 °C for service exposure, and adhered to insulation class A, similar to cellulose-based insulations. The addition of cellulose to polyolefin composites appears to slightly improve their breakdown strength. The conductivity for this type of composite is at least three times lower than that of cellulose insulation materials, rendering them beneficial for applications in electrical engineering as potential substitutes for cellulose-based materials in multiple electrical insulation uses, e.g., for insulating low voltage electrical machines, as well as serving as a substitute for pressboard in transformers. Additionally, their thermoplastic properties offer enhanced processing versatility, opening up new opportunities for electrical engineering technology, especially with regard to electrical insulation recyclability in the context of a circular economy.