Related Experiment Video
Updated: Apr 15, 2026

The Preparation and Properties of Thermo-reversibly Cross-linked Rubber Via Diels-Alder Chemistry
Published on: August 25, 2016
Effect of Chemical Cross-Linking on Compatibility and Laboratory Performance of SBS/PE/EVA Ternary Composite Modified
Hong Zhang1,2,3,4, Cheng Wang1,2,3,4, Yiming Chen1,2,3,4
1Key Laboratory of Environment-Friendly Composite Materials of the State Ethnic Affairs Commission, College of Chemical Engineering, Northwest Minzu University, Lanzhou 730124, China.
Abstract:
In response to the shortcomings still observed in polyethylene (PE)/ethylene-vinyl acetate (EVA)/styrene-butadiene-styrene (SBS) composite modified bitumen regarding storage stratification and low-temperature performance, this paper further introduces furfural extract, elemental sulphur, stabilisers and Z-6036 into this ternary system, and employs orthogonal design to screen the additive ratios. Tests were conducted on conventional physical properties, rotational viscosity, dynamic shear rheology and bending beam rheology, focusing on the material's temperature sensitivity, rheological behaviour, low-temperature creep resistance and phase characteristics. The modification effects were analysed using fluorescence microscopy, scanning electron microscopy and infrared spectroscopy. Compared with the control group composed of 4% PE, 4% EVA and 2% SBS, the samples obtained from the orthogonal design showed an increase in elongation at 5 °C ranging from 52.5% to 213.9%; the difference in softening points decreased from 35.2 °C to a minimum of 0.1 °C, indicating improved storage stability. The temperature sensitivity of all sample groups was reduced, with the optimal group achieving a VTS of -0.4413, representing a 46.7% improvement over the control group. At -12 °C, the m-values of all nine orthogonal samples were higher than those of the control group, with seven groups reaching m ≥ 0.3, indicating improved low-temperature stress relaxation capability. A comprehensive analysis of the experimental results indicates that the selected chemical additives are beneficial for optimising the dispersion state and compatibility of the SBS/PE/EVA ternary modified bitumen, whilst also balancing rheological properties and low-temperature crack resistance to a certain extent. Microscopic and spectroscopic analyses further suggest that internal interactions within the system have been enhanced and the phase distribution has become more uniform; however, the current evidence is insufficient to conclusively determine that a specific form of chemical cross-linking reaction has occurred.
Related Concept Videos
Superplasticizers
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Plasticizers
Plasticizers function by using surface-active agents to create repulsive electrostatic forces between cement particles. This dispersion enhances the concrete's...
Additives and Fillers in Concrete
The...
Accelerators
The effectiveness of calcium chloride can...
Effects of Air-entrainment in Concrete

