A Novel Prescribed-Time Control Approach Under Unknown Control Gain and Mismatched Disturbance
None:
In this article, a prescribed-time output feedback controller is proposed for a class of uncertain nonlinear systems with unknown control coefficients and mismatched nonvanishing disturbances. Both unknown control coefficients and mismatched disturbances are tricky to address by the existing prescribed-time output feedback control frameworks. Differently, a novel prescribed-time control criterion in conjunction with Nussbaum functions is proposed, and prescribed-time stability is achieved. Furthermore, design methods for a state observer and a prescribed-time output feedback controller are developed. With the proposed control design, both the system output and observer errors are rigorously proved to converge to zero within a prescribed time. Moreover, the unified prescribed performance (UPP) of the system output and the satisfaction of output constraints are simultaneously achieved. Numerical simulations and experiments are provided to illustrate the effectiveness of the proposed control design.
Related Concept Videos
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Control Systems
At the heart...
Time and frequency -Domain Interpretation of PI Control
Acting as a low-pass filter, the PI controller slows the system's response and extends settling times. This requires...
Time and frequency -Domain Interpretation of Phase-lag Control
Phase-lag controllers do not place a pole at zero, but instead influence the steady-state error by amplifying any...
Time and frequency -Domain Interpretation of Phase-lead Control
The design of phase-lead control involves the strategic placement of poles and zeros to balance steady-state error and system...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...


