Carboxylated Poly(vinylidene fluoride) Copolymer: A Facile Route to Improve Ultrafiltration Membrane Properties for...

Poly(vinylidene fluoride) (PVDF)-based ultrafiltration membranes play key roles in aqueous separation fields. However, the inherent hydrophobicity of PVDF always generates higher water permeation resistance and a greater fouling tendency in the filtration process. Different to the widely reported and widely used blending methods of increasing the hydrophilicity of PVDF membranes, the mass-produced hydrophilic PVDF copolymer is expected to be more efficient in producing high performance membranes. For this purpose, the present research offers a new and scalable approach to improving the hydrophilic properties of PVDF-based membranes through amphiphilic copolymers. Using 2-trifluoromethylacrylic acid (MAF) and hexafluoropropylene (HFP), carboxylated PVDF (PVHM) was synthesized following simple radical suspension copolymerization. Via a non-solvent-induced phase separation (NIPS) method, PVHM membranes were prepared and characterized. It was found that the PVHM membranes had enhanced hydrophilicity, permeability, fouling resistance, and alkali resistance compared with PVDF membranes. For the PVHM containing 8.3 wt% MAF, its membrane demonstrated superior static/dynamic fouling resistance to sodium alginate (FRR up to 99.1% for SA). Therefore, carboxylated PVDF polymers show potential for use in the industrial production of high-performance ultrafiltration membranes.