Related Experiment Video

Updated: May 5, 2026

Automatic Laser-based Geometry Capture for Finite Element Analysis of Weld Beads
07:58

Automatic Laser-based Geometry Capture for Finite Element Analysis of Weld Beads

Published on: July 25, 2025

1.1K

La Coupole: an SVBRDF measurement device for large and non-planar objects

Antoine Lucat, Pierre Mézières, François Margall

    Optics Express
    |May 4, 2026
    PubMed

    More Related Videos

    A Random-displacement Measurement by Combining a Magnetic Scale and Two Fiber Bragg Gratings08:23

    A Random-displacement Measurement by Combining a Magnetic Scale and Two Fiber Bragg Gratings

    Published on: September 30, 2019

    5.5K
    Precision Measurements and Parametric Models of Vertebral Endplates10:35

    Precision Measurements and Parametric Models of Vertebral Endplates

    Published on: September 17, 2019

    5.9K

    Related Concept Videos

    Design Example: Measuring Distance Between Two Points with Obstructions01:10

    Design Example: Measuring Distance Between Two Points with Obstructions

    When measuring distances in areas with physical obstructions, such as a lake in a field, surveyors must employ techniques to calculate accurate lengths without direct line measurements. One effective method is the offset technique, which allows for precise distance estimation over inaccessible stretches.In this scenario, a surveyor must measure a side of an area that crosses a lake. Since the measuring tape cannot span the lake, the surveyor begins by establishing a baseline that aligns with...
    581
    Distance Corrections01:15

    Distance Corrections

    To achieve precise distance measurements, especially in surveying and construction, certain corrections must be applied to account for potential sources of error like the standardization errors, temperature variations, and slope adjustments.Standardization error emerges when measurement equipment undergoes changes, such as wear, repairs, or weather impacts. To address this, surveyors compare the equipment’s readings to a standard. This process identifies any deviation that might lead to...
    430
    Measurement: Standard Units03:38

    Measurement: Standard Units

    Every measurement provides three kinds of information: the size or magnitude of the measurement (a number), a standard of comparison for the measurement (a unit), and an indication of the uncertainty of the measurement. While the number and unit are explicitly represented when a quantity is written, the uncertainty is an aspect of the errors in the measurement results.
    61.6K
    Measurement: Derived Units03:02

    Measurement: Derived Units

    The International System of Units or SI system, by international agreement, has fixed measurement units for seven fundamental properties: length, mass, time, temperature, electric current, amount of substance, and luminosity. These are called the SI base units.
    41.9K