A Review of Catalysts for Hydrogen Production from Methanol

Methanol is the simplest C1 oxygenated compound possessing the highest hydrogen-to-carbon ratio and can therefore be used as an effective hydrogen carrier. Furthermore, it can be easily transported by land and sea because it is liquid at room temperature and atmospheric pressure. Methanol can be converted into hydrogen via methanol steam reforming (MSR), aqueous-phase reforming of methanol (APRM), or aqueous methanol dehydrogenation (AMDH). In this review, various catalysts for MSR, APRM, and AMDH are summarized. Highly active and stable catalysts that can operate under low steam-to-methanol ratios are needed to increase the economics of the MSR process. Compared with the MSR process, the APRM process is rather simple because the water-gas shift reaction can occur simultaneously; however, more constraints exist in the selection of active metals and supports to ensure high activity and stability under APRM conditions. The inherently low reaction rate compared to MSR and the structural vulnerability of the catalyst under severe hydrothermal conditions are obstacles that the APRM catalysts must overcome. The low intrinsic catalytic activity and the high cost of homogeneous catalysts represent fundamental limitations inherent to AMDH catalysts. Based on a literature survey of MSR, APRM, and AMDH catalysts, some future research directions are also discussed.