Walls That Grow: Fungal Species-Driven Performance of Mycelium-Based Composites Grown on Rice-Husk Waste

Mycelium-based composites (MBCs) are gaining attention as sustainable alternatives to conventional materials because they are grown biologically rather than produced through resource-intensive extraction and processing. This study evaluates MBCs for non-load-bearing wall panels and environmentally responsible substitutes for traditional building materials. A reproducible manufacturing process is presented, and heat-pressed panels are characterised for physical, mechanical, and chemical performance. Novelty lies in species-driven evaluation using rice-husk waste as the sole lignocellulosic substrate and a Queensland-native Amauroderma species. Five fungal species, Trametes hirsuta, Ganoderma sp., Amauroderma sp., Pycnoporus coccineus and Trametes versicolor, were cultivated on rice husks and compared under identical processing conditions. Statistical analysis showed species selection significantly influenced tensile strength, whereas flexural and compressive performance showed no significant interspecies differences. Panels achieved tensile, compressive, and flexural strengths up to approximately 0.47, 0.35, and 1.35 MPa, respectively, with Amauroderma exhibiting the highest stiffness and compressive performance. Composites from four of the five species showed low moisture sensitivity and favourable thermal behaviour relative to previously reported mycelium materials. These results demonstrate that fungal species selection is a key design lever and supports rice-husk-derived MBCs as sustainable insulation and non-load-bearing construction materials.