Performance Evaluation and Micro-Mechanisms of Composite Asphalt Modified by Desulfurized Rubber Powder and Distinct...

The synergistic utilization of waste plastics and tires in asphalt modification is a highly promising sustainable strategy. However, the differential impacts of distinct plastic molecular architectures on the performance and network evolution of rubber-modified asphalt remain fundamentally unclear. This study systematically investigated the physical, rheological, and microstructural properties of composite asphalts modified with desulfurized rubber powder (DRP) and four representative plastics: polyethylene (PE), styrene-isoprene-styrene (SIS), styrene-ethylene-butylene-styrene (SEBS), and styrene-butadiene-styrene (SBS). Furthermore, the pavement performance of the asphalt mixtures prepared via dry and wet methods was comparatively evaluated. Microstructural and spectroscopic analyses revealed that the composite modification was primarily governed by physical blending and swelling. The non-polar, semi-crystalline PE resulted in severe phase separation and extreme low-temperature brittleness. Conversely, the saturated hydrogenated mid-blocks of SEBS endowed the asphalt with the highest high-temperature rutting resistance but severely compromised its low-temperature stress relaxation. Remarkably, SBS interacted synergistically with DRP to form a highly homogeneous and densely interwoven three-dimensional network, thereby achieving an optimal viscoelastic balance, outstanding storage stability, and superior low-temperature ductility. Pavement performance tests further demonstrated that the wet method significantly outperformed the dry method for block copolymers by facilitating sufficient pre-swelling. Overall, the SBS-DRP composite-modified asphalt prepared via the wet method exhibited the most exceptional and balanced comprehensive pavement performance, providing a robust theoretical foundation for the sustainable and high-value recycling of multi-source solid wastes in paving engineering.