Preparation of a Multifunctional Gel for Fire Prevention and Extinguishing Based on Polyvinyl...

A ternary gel composed of polyvinyl alcohol (PVA), polyethyleneimine (PEI), and polyaluminum chloride (PAC) was prepared to address the limited controllability of gelation and the insufficient high-temperature resistance to re-ignition observed in existing mine fire prevention and extinguishing gels. Based on an orthogonal experimental design, the optimal formulation was identified as 14% PVA, 7% PEI, and 5.5% PAC (by mass), achieving a gelation time of 8.2 min. Microscopic characterization revealed that the gel forms a dense, interconnected three-dimensional network structure capable of effectively encapsulating the coal particles. Fourier transform infrared spectroscopy (FTIR) analysis showed that gel treatment resulted in a 29.8% reduction in the peak area of free hydroxyl groups. Thermogravimetric-differential scanning calorimetry (TG-DSC) analysis indicated that the gel increased the ignition temperature by 33.27 °C and shifted the maximum exothermic peak temperature by 13.28 °C. Fire suppression experiments demonstrate that the gel could continuously lower the temperature of high-temperature coal without re-ignition, demonstrating significantly superior performance compared to traditional sodium silicate gel. This gel achieves highly efficient fire prevention and suppression through the cooperative effects of water retention, oxygen barriers, and chemical passivation, providing a new material for the prevention and control of spontaneous coal combustion in deep mines.