Impact of Ferrite-Cementite Microstructure on Tensile and Cutting Behaviour of C75S Steel

In this study, scanning electron microscopy (SEM) analysis is used to reveal the real microstructure of C75S steel and to compare grain morphology and deformation features with numerical predictions. A micro-scale finite element model of C75S steel is developed to investigate its tensile response in order to understand how steel actually deforms and fails at the microstructure level. Subsequently, the validated microstructural model is employed to simulate the cutting process using the finite element method, focusing on stress concentration and damage initiation at the grain and interface zones. The results demonstrate that microstructural modelling provides improved insight into deformation and fracture mechanisms compared to homogenised approaches, highlighting the critical role of cementite distribution and interfacial behaviour during tensile loading and micro-scale cutting. The cementite particle sizes in C75S steel range from approximately 0.5 to 2.0 µm, with circularity values between 0.7 and 0.95 and a volume fraction of about 10-12%. The proposed framework offers a robust basis for predicting the cutting performance of high-carbon steels.