Related Experiment Video
Updated: May 22, 2026

Making Record-efficiency SnS Solar Cells by Thermal Evaporation and Atomic Layer Deposition
Published on: May 22, 2015
Quantifying Junction/Edge Defect Density of Crystalline Silicon Solar Cells Enabled by Depth-Resolved Transient
Zhizhang Xiang1, Chufang Xing1, Liyun Xu2
1State Key Laboratory of Bioinspired Interfacial Materials Science, Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, Suzhou, P. R. China.
Abstract:
In the pursuit of higher efficiency for crystalline silicon (c-Si) solar cells, understanding carrier recombination dynamics is essential. While transient photovoltage (TPV) spectroscopy provides excellent temporal resolution for probing recombination, it conventionally offers no spatial resolution to analyze local behavior. Herein, we report a depth-resolved TPV system that enables localized analysis of carrier dynamics by tuning the excitation wavelength to control light penetration depth. The technique was used to explore internal carrier recombination in silicon heterojunction (SHJ) and tunnel oxide passivated contact (TOPCon) solar cells. Interestingly, SHJ cells exhibit low and symmetric internal recombination owing to effective passivation by intrinsic hydrogenated amorphous silicon layers on both sides. In contrast, TOPCon cells display higher recombination at the front surface due to insufficient surface passivation. Furthermore, edge-resolved measurements reveal that subsurface defects contribute significantly to edge recombination, particularly in SHJ solar cells. Finally, by correlating the TPV decay lifetime constant with the defect-state density, we obtained a layer-resolved quantitative estimate of the defect distribution within the solar cell. In addition, the transient monitoring of carrier diffusion and recombination was validated through photovoltage-decay simulations. Our findings elucidate the asymmetric recombination behavior and establish depth‑resolved TPV as a powerful diagnostic tool for advanced photovoltaics.
Related Concept Videos
P-N junction
Imperfections in Crystal Structure: Stoichiometric Point Defects
Schottky Barrier Diode
Modeling of Diode Forward Characteristics
Modeling of Diode Reverse Characteristics
When a reverse voltage applied to a Zener diode exceeds its breakdown voltage, the diode enters the breakdown region. At this point, the...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...

