Related Experiment Video
Updated: Jun 12, 2026

Investigating the Potential of Singly Curved Thin Piezoelectric Transducers for Energy Harvesting and Structural Health Monitoring
Published on: November 14, 2025
Integrated slope stability assessment of earthen canals under seismic loading using pseudostatic analysis and vetiver
Wahidullah Hazim1, Asadullah Ziar2
1Department of Civil Engineering, Kabul University, Kabul, 1054, Afghanistan. wahidullahhazim@ku.edu.af.
Abstract:
Earthen canals in seismically active regions face combined hydraulic and earthquake loading that can compromise slope stability. This study evaluates the effectiveness of vetiver grass as a bioengineering reinforcement through Pseudostatic slope stability analysis of a critical section (IT3) of the Khush Tepa Canal using the Morgenstern-Price limit equilibrium method. Steady-state, rapid drawdown, and seismic scenarios were systematically assessed to quantify their influence on slope performance and reinforcement benefits. Results show that the canal is stable under steady-state conditions (FoS = 2.11), while seismic loading reduces stability (FoS = 1.25, a 40.8% reduction), and rapid drawdown represents the most critical scenario (FoS = 1.10). Vetiver grass reinforcement substantially improves levee stability, increasing the FoS from 1.93 to 2.37 (a 22.8% gain) under static conditions. This improvement is attributed to increased apparent cohesion from the dense root network, which constrains failure surfaces to shallower depths and prevents deep rotational sliding. These quantitative improvements demonstrate that vetiver grass provides measurable structural reinforcement. The findings support integrating nature-based solutions into earthen canal design to enhance both hydraulic and seismic resilience in earthquake-prone regions.
Related Concept Videos
Design Example: Maintaining Level of an Embankment
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by a...
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...
Elasticity in Concrete
Stresses under Combined Loadings
The process begins by slicing the tube at critical points and analyzing the internal forces and stress components at these sections, focusing on the centroid. Normal stresses, generated by axial forces and bending moments, are either compressive or tensile and vary across the section from...
Permeability of Concrete