Related Experiment Video
Updated: Jun 13, 2026

Fabrication of Superhydrophobic Metal Surfaces for Anti-Icing Applications
Published on: August 15, 2018
Study on the Anti-Icing and De-Icing Performance of a New Superhydrophobic Coating PTFE/SiO2-ER/FR Composite
Xinggui Lei1, Shifeng Liu1,2, Qiuyan Xie1
1College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China.
Abstract:
This work describes the preparation of PTFE (polytetrafluoroethylene)/SiO2 (silicon dioxide)-ER (epoxy resin)/FR (fluorosilicone resin) superhydrophobic coatings using the spray method to improve the anti-icing and de-icing performance of transmission line insulators. The coatings exhibit a consistent fluorine distribution (32.86 wt%), which enhances their low surface energy, alongside SiO2 nanoparticles that occupy the interstices between PTFE particles, resulting in a dense micro- and nanoscale hierarchical structure. Consequently, the coatings have good superhydrophobicity, featuring a contact angle of 173.9° and roll angle of 1.2°. Following 66 days of UV irradiation, the contact angle remains above 150°, and the roll angle is approximately 15°, accompanied by a slight increase in ice adhesion strength. Following 26 freeze-thaw cycles, the contact angle stabilizes at around 157°, showing good environmental durability. Natural icing studies validate the coatings' good anti-icing and de-icing efficacy: in comparison to common insulators, the coated insulators demonstrate a 14.2% reduction in ice accretion weight and a 67.7% reduction in maximum ice ridge length.

