Modified Plastic Optical Fibers Combined with Molecularly Imprinted Polymers and Gold Nanorods for Furfural Detection...

This work presents an intrinsic optical fiber sensor based on plasmonic phenomena in modified plastic optical fibers (POFs). The sensing area is achieved by replacing the polymethyl methacrylate (PMMA) core with a molecularly imprinted polymer (MIP) containing gold nanorods (GNRs). Thus, in the sensing area, the MIP acts as both a selective recognition element and an optically sensitive guiding medium where plasmonic phenomena occur. This optical-chemical configuration has been developed as a proof-of-concept for the detection of furfural in aqueous solution. The proposed sensor achieves a limit of detection (LOD) of 27 pM, demonstrates high selectivity for the analyte of interest, and is applicable even in real-world scenarios, as demonstrated by experimental results (a commercially available infant milk). The proposed sensor presents a significant enhancement of the sensor response, of about six orders of magnitude, compared to a conventional configuration where the same (or a similar) mixture of MIP/GNRs is spun over the exposed PMMA of a D-shaped POF area for comparison. Notably, even if this study has been carried out via a proof-of-concept in furfural detection, this substantial improvement is achieved while preserving a simple, portable, and cost-effective optical setup, highlighting the potential of this sensing strategy for the development of highly selective sensors by changing the MIP template.