Dispersion-driven interphase engineering and quantitative stress transfer in chemically inert PTFE/MWCNT...

Interphase engineering in chemically inert polymer nanocomposites remains fundamentally unresolved due to the difficulty of decoupling physical confinement effects from chemical functionalization. Here, we establish a quantitative dispersion-interphase-structure framework using non-functionalized PTFE/MWCNT nanocomposites as a model inert system. By systematically varying nanotube loading (10 : 1-10 : 4 PTFE : MWCNT), we isolate dispersion-driven physical interactions in the complete absence of covalent bonding. Raman spectroscopy reveals a monotonic reduction in I_D/I_G (1.08-0.97) and a reproducible G-band upshift (∼6 cm^-1), corresponding to an estimated interfacial strain of ∼0.22%, providing evidence of measurable stress transfer primarily arising from physical confinement. X-ray diffraction coupled with FWHM and Scherrer analysis demonstrates crystallite enlargement at intermediate loadings, while DSC-based crystallinity calculations identify a maximum relative crystallinity at 10 : 2 composition. At higher nanotube loading, partial re-agglomeration and confinement-dominated restriction reduce crystalline ordering despite elevated melting temperature (328-334 °C). These results suggest that dispersion plays a significant role as a thermodynamic regulator of interphase evolution in fluoropolymer nanocomposites. This work provides insight into the underlying mechanisms of stress transfer and crystallization behavior in chemically inert CNT/polymer systems and establishes a rational strategy for interphase engineering without chemical modification.