K-edge optimization of PMMA-based metal oxide shields for dental X-ray protection using Geant4 Monte Carlo...

This study investigates PMMA-based composites enhanced with high-Z metal oxides (SnO₂, La₂O₃, Sm₂O₃, Er₂O₃, WO₃, and PbO) for dental diagnostic X-ray shielding. The oxides were selected for their K-edge energies lying within the 20-90 keV range relevant to dental radiology. PbO was included only as a benchmark material, while the other oxides were evaluated as safer, eco-friendly alternatives. Geant4 Monte Carlo simulations, validated against NIST XCOM with < 1% deviation, were employed to calculate key shielding parameters including linear attenuation coefficient (LAC), mean free path (MFP), half-value layer (HVL), tenth-value layer (TVL), effective atomic number (Z_ₑff), and effective electron density (N_ₑff). The results demonstrate that each oxide significantly improves PMMA's attenuation capability, particularly at photon energies just above its K-edge. In the investigated energy range, sharp enhancements in LAC, Z_eff, and N_eff, along with reductions in MFP, HVL, and TVL, were observed. Specifically, the maximum LAC values reached 15.309 cm⁻¹ for PMMA-Sn at 30 keV, 10.356 cm⁻¹ for PMMA-La at 40 keV, 7.353 cm⁻¹ for PMMA-Sm at 50 keV, 5.761 cm⁻¹ for PMMA-Er at 60 keV, 4.204 cm⁻¹ for PMMA-W at 70 keV, and 3.300 cm⁻¹ for PMMA-Pb at 90 keV, corresponding closely to the K-edge energies of the respective elements. Notably, all composites outperformed PbO in attenuation efficiency within their respective K-edge regions. These findings highlight the potential of strategically exploiting K-edge absorption to design lightweight, non-toxic PMMA-based shielding materials optimized for specific dental imaging modalities.