Related Experiment Video
Updated: Jun 19, 2026

Sampling and Pretreatment of Tooth Enamel Carbonate for Stable Carbon and Oxygen Isotope Analysis
Published on: August 15, 2018
Measurement of Stable Carbon Isotope Ratio of Volatile Organic Compounds Using Thermal Desorption-Gas
Li Yuhong1, Lin Xihuang1, Lin Cifu1
1Third Institute of Oceanography, Ministry of Natural Resources, Xiamen, China, mnr.gov.cn.
Abstract:
This paper presents a method combining a thermal desorption (TD) unit with gas chromatography-combustion-isotope ratio mass spectrometry (GC-C-IRMS) to determine compound specific δ13C values of seven VOCs (benzene, toluene, ethylbenzene, m/p-xylene, o-Xylene, styrene, and cumene). The main innovation lies in the systematic validation of TD-GC-C-IRMS for atmospheric VOC analysis, which enables reliable δ13C determination with minimal isotopic bias. The optimal TD conditions were 300°C and 5 min. Advantages include high precision (SD ≤ 0.4‰), good reproducibility, long-term sample stability (up to 50 days), and suitability for on-site air sampling. Limitations are the coverage of only seven compounds and a wider range of VOC species and more complex matrices should be addressed in future work. The method was successfully applied to ambient air samples, and isotopic signatures indicated that VOCs were mainly derived from traffic-related emissions. This approach provides a robust and practical tool for source identification of atmospheric VOCs and supports source apportionment studies in environmental research.
Related Concept Videos
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall. The coating...
Volatilization
Mass Spectrometry: Isotope Effect
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Types of Detectors-II
