Study on the Influence Mechanism of Mineral Admixtures on Hydration and Microstructure of Yellow River Sediment-Based...

This study investigates the effects and mechanisms of three mineral admixtures-fly ash (FA), silica fume (SF), and metakaolin (MK)-on the fresh, mechanical, and microstructural properties of Yellow River sediment (YRS)-based shotcrete. A comprehensive experimental program was conducted, including setting time determination, workability assessment, and mechanical strength evaluation, complemented by microstructural characterization using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The results indicate that the incorporation of FA prolonged initial and final setting times and improved pumpability but reduced build-up thickness and compressive strength; splitting tensile strength at later ages remained comparable to the control. SF shortened the final setting time and reduced flowability but enhanced shootability, layer build-up, and medium- to later-age compressive and tensile strengths, with an optimal dosage of 5%. MK accelerated the final setting time, slightly reduced early-age compressive strength, but improved early-age splitting tensile strength and achieved 28-day compressive strength comparable to the control. Microstructural analyses revealed that FA participates in pozzolanic reactions forming C-(A)-S-H gel, while SF and MK promote the formation of dense C-S-H and carboalumination phases, enhancing matrix densification. Based on performance evaluation, the recommended dosages are FA ≤ 20%, SF ≤ 15%, and MK ≤ 15%. These results establish clear links between macroscopic performance and microstructural evolution, providing experimental guidance for the sustainable development of YRS-based shotcrete.