A Study on the Evolution of Intermetallic Phase Microstructure and High-Temperature Creep Behavior in...

The effects of Mn/RE (Nd, Gd) multi-modification on the microstructure and high-temperature compressive creep properties of Mg-8.0Al alloys were investigated. The dominant intermetallic phases in the as-cast microstructure are β-Mg₁₇4Al₁₂, Al₂(Gd,Nd), Al₁₁(Gd,Nd)₃, Al₈(Gd,Nd)Mn₄, and Al₁₀Mn₂(Gd,Nd). The detailed structures of various intermetallics were revealed by TEM; the results indicate that Mn addition promotes grain refinement and facilitates the precipitation of lath-shaped and spherical β-Mg₁₇Al₁₂ in as-cast Mg-Al-RE alloys, resulting in increases in the tensile strength and elongation of the 1.0Mn alloy by 26.5% and 92.1%, respectively. Additionally, thermally stable micron-scale Al₈(Gd,Nd)Mn₄ and Al₁₂(Gd,Nd)₂Mn₅, along with dynamically precipitated spherical nano-sized AlGd and AlNd particles in the α-Mg matrix, were innovatively observed in compression-crept specimens tested at 200 °C and 60 MPa; these phases play a key role in improving high-temperature creep resistance. A significant finding is that excessive Mn addition deteriorates creep performance, which is attributed to excessive grain refinement and the consequent increase in the contribution of grain boundary sliding during creep. However, the negative effect of grain boundary sliding-caused by grain refinement-on creep performance can be balanced by the strengthening effect of Al-Mn-Gd phases and the dynamic precipitation of nanoscale Al-RE particles. This paper provides new insights for designing Mg-Al-Nd-Gd-Mn alloys with both excellent high-temperature creep resistance and significantly enhanced mechanical properties.