Optimized Design and Radiation Error Correction of a Naturally Ventilated Air Temperature Sensor for Atmospheric...

Air temperature measurements in atmospheric environmental monitoring are susceptible to radiation-induced bias under natural ventilation. This study develops a low-power naturally ventilated air temperature sensor and a correction method combining computational fluid dynamics (CFD) with machine learning. The sensor integrates a Pt100 thin-film platinum resistance probe (Heraeus Holding GmbH, Hanau, Germany), symmetric guide plates, and a dual aluminum-plate radiation shield to reduce radiative heating while improving airflow around the probe. A three-dimensional fluid-solid coupled heat-transfer model was established in ANSYS FLUENT 15.0 to optimize guide-plate spacing and inclination angle and quantify the effects of solar radiation, long-wave radiation, scattered radiation, air density, wind speed, solar elevation angle, and surface albedo on radiation error. CFD results identified a guide-plate spacing of 24 mm and an inclination angle of 45° as the preferred parameters. A multilayer perceptron (MLP) model trained with CFD-derived data was validated in field experiments using a Model 076B aspirated radiation shield (Met One Instruments, Inc., Grants Pass, OR, USA) as the reference. The model predicted radiation error with a root mean square error (RMSE) of 0.052 °C, a mean absolute error (MAE) of 0.042 °C, and a correlation coefficient of 0.92. The proposed sensor and correction method provide a low-power and easy-to-maintain approach for reducing radiation-induced bias in naturally ventilated air-temperature measurements, with potential applications in meteorological observation, air-quality monitoring, and agricultural microclimate assessment.