Charge Air System in an Experimental Combustion Engine-Combined Simulation Model: A Digital Twin Approach Including...

The larger research problem is to get combustion engines more effective and flexible and reduce or even eliminate greenhouse gas emissions. Here we concentrate more on a smaller-scale and focused research problem about the significance of air feeding in engine operation. Therefore, the need for modeling a charge air system is obvious. The interaction and co-operation between the charge air systems and combustion engines is a central issue in this article. A literature review was carried out on related topics, and it reveals a research gap in this area. A simulation model of a charge air system based on first principles is developed. It is based on physical and systemic modeling, and it is constructed including control loops reducing and controlling the pressures in the charge air chain. The simulation models of this auxiliary system and engine are successfully combined, and functioning together is demonstrated. The composed models represent real research laboratory equipment in the University of Vaasa Energy Laboratory under construction. The research laboratory equipment and the whole research environment are described. Simulation scenarios are presented both with the charge air system alone and with the combined model, including also the engine part. The significance of the developed models is discussed, and the path towards a digital twin experiment environment is outlined. As a conclusion, we can claim that the combined simulation model is successfully constructed and shown to operate in a stable and physically plausible manner. The digital twin concept can be tested completely only when the research laboratory is constructed and ready and the test runs begin to produce measurement data for the digital part. Then also the simulation models can be tuned to a better accuracy level, and the operation as a digital twin will be verified.