Mesogen-Containing Reactive Epoxy Monomer for Tuning the Thermal, Rheological, and Mechanical Properties and...

Thermally conductive epoxy potting compounds require high filler loadings for effective heat dissipation. However, high filler loadings can increase viscosity and brittleness, thereby impairing processability and service reliability. In this study, a mesogen-containing reactive liquid-crystalline epoxy monomer (LCE) was designed, synthesized, and incorporated into a commercial thermally conductive epoxy potting compound to investigate its effects on thermal behavior, rheological and mechanical properties, thermal conductivity, and fracture-surface morphology. The chemical structure and thermotropic liquid-crystalline behavior of LCE were characterized via Fourier-transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, differential scanning calorimetry, and polarized optical microscopy. Increasing LCE loading elevated the DSC-derived glass transition temperature (T_g) from 59 °C to 96 °C and markedly increased the room-temperature complex viscosity. Single-point measurements at 25 °C showed a monotonic decrease in thermal conductivity from 0.95 to 0.52 W/(m·K) with increasing LCE content. Mechanical testing revealed that the nominal 10% LCE formulation provided the best balance between load-bearing capacity and ductility among the tested formulations, whereas higher LCE loadings were associated with greater local microstructural variation and reduced mechanical properties. This study clarifies the modulation effect of LCE on the performance balance of highly filled epoxy potting compounds, providing valuable insights for future formulation optimization.