Synthesis of Carbon Nanomaterial from Coke and Preparation of Copper Oxide-Based Composite

The development of low-cost and highly sensitive electrochemical sensing platforms for pesticide monitoring has attracted significant attention in recent years. In this study, coke-derived carbon (CDC) was successfully synthesized from petroleum coke through high-temperature carbonization under a nitrogen atmosphere. Subsequently, a CDC@CuO-NP nanocomposite was fabricated by depositing copper oxide nanoparticles onto the CDC matrix. The morphology, structure, and elemental composition of the synthesized materials were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), and elemental mapping analyses, confirming the successful formation of the composite and the uniform distribution of CuO nanostructures on the carbon surface. Electrochemical characterization demonstrated that the incorporation of CuO significantly enhanced the electrochemical performance of CDC by increasing the electroactive surface area and facilitating electron transfer. The CDC@CuO-NP-modified glassy carbon electrode was applied for the electrochemical detection of dichlorvos (DDVP) using electrochemical impedance spectroscopy (EIS). The sensor exhibited a concentration-dependent increase in charge-transfer resistance and showed a linear response in the concentration range of 247-3770 nM, with the regression equation y = 47.1458C + 111.8162 and a correlation coefficient of R² = 0.9832. The developed sensor achieved a low limit of detection (LOD) of 2.3 nM, demonstrating high sensitivity toward DDVP. These results indicate that the CDC@CuO-NP nanocomposite is a promising, low-cost, and efficient electrode material for the sensitive determination of organophosphorus pesticides and has considerable potential for environmental monitoring and food safety applications.