Fabrication of Catalytic Distillation Membranes with Atomic Layer Deposition

The integration of catalysts onto the surface of membranes enables simultaneous physical separation and catalytic transformation of constituents in a feed stream, facilitating improved contaminant removal and fouling mitigation. Distillation membranes are a particularly attractive platform for catalytic membranes because they reject nonvolatile species and exhibit exceptional resistance to oxidative and radical-driven degradation. However, imparting catalytic functionality onto hydrophobic, porous distillation membranes has proven challenging since the membranes used are chemically inert and difficult to modify. Furthermore, catalysts on the membrane surface can decrease hydrophobicity and increase the membrane's susceptibility to pore wetting and failure. In this work, we create a catalytic distillation membrane by coating a polytetrafluoroethylene membrane surface with titanium dioxide (TiO₂) via plasma-assisted atomic layer deposition (ALD). By precisely tuning the ALD parameters, we demonstrate localized growth of TiO₂ near (within approximately 1 μm) the surface of polytetrafluoroethylene membranes, forming a catalytically active interface while preserving the underlying hydrophobic pore structure. Localized growth of TiO₂ is confirmed by electron microscopy and spectroscopy techniques, and membranes coated with 500 cycles of ALD show pressure tolerance up to 12.8 bar and higher than 95% salt rejection in pressure-driven distillation. Photocatalytic activity is demonstrated via the degradation of methylene blue dye under UV irradiation, where increasing TiO₂ loading leads to an enhancement in dye degradation. These results establish a general strategy for integrating catalytic functionality into chemically inert, hydrophobic membranes without compromising distillation performance, providing a pathway toward multifunctional membranes that couple advanced oxidation with membrane separation for water treatment.