Related Experiment Videos
Impact of room configuration on energy use intensity in high-density pilgrim accommodations: a case study in Makkah,
Mosaab Alaboud1, Naif Sultan Alaboud2
1Department of Architectural Engineering, College of Engineering, Taibah University, Madinah, 42353, Saudi Arabia. maboud@taibahu.edu.sa.
Abstract:
Saudi Arabia's arid climate, characterized by high cooling degree days, necessitates significant electricity consumption for air conditioning, which accounts for approximately 70% of the building electricity demand. This study investigated the thermal behavior and energy performance of two distinct room configurations (20 and 12 m2, containing 5 and 3 beds, respectively) in a high-density pilgrim hostel in Makkah through physical measurements and building energy simulations. Dry bulb temperatures were continuously monitored in each room for approximately two weeks (March 28-April 11, 2026), and a dynamic thermal model was subsequently developed and calibrated against the empirical data to evaluate the structural thermal performance. The calibration exhibited a high correlation between the monitored and simulated results, validating the reliability of the model. Ultimately, the larger room configuration exhibited superior energy efficiency; specifically, the 20 m2 room consumed approximately 7% less cooling energy per unit area than the 12 m2 room (170 vs. 182 kWh/m2, respectively). This study demonstrates that room configuration and structural boundaries mitigate cooling demands more significantly than occupant density effects, highlighting the priority of geometric optimization in retrofitting protocols.
Related Concept Videos
Thermal Insulation in Masonry Walls
External insulation can be applied using an Exterior Insulation and Finish System (EIFS), which involves affixing panels of plastic foam to the wall and covering them with a polymeric stucco reinforced with glass fiber mesh.
Energy Conservation and Bernoulli's Equation
All the terms in the equation have the dimension of energy per unit volume. The kinetic energy per unit volume is called the kinetic energy density, and the potential energy per unit volume is...
Design Example: Sustainability in Concrete Building
There are multiple approaches to achieve sustainability in a commercial concrete building. For instance, construct a concrete parking area under the building, utilizing pervious concrete paver blocks in open areas to facilitate rainwater collection through an underground cistern.
Energy Budgets and Reproductive Strategies
Conduction, Convection and Radiation: Problem Solving
In order to solve a problem related to heat transfer, first of all, the situation needs to be examined to determine the type of heat transfer involved. This could...
Factors Affecting Activity Coefficient
The activity coefficient value for an ion is close to one when the solution has almost zero ionic strength, i.e., when the solution shows close to ideal behavior. As the ionic strength of the solution increases from 0 to 0.1 mol/L, a decrease in the...