Interference-Enhanced Absorption in Miniaturized Graphene Plasmonic Terahertz Detectors via Substrate-Defined...

Two-dimensional (2D) material terahertz (THz) detectors offer a promising platform for compact, room-temperature detection, yet their performance is fundamentally constrained by weak absorption in atomically thin layers. Here, we demonstrate a graphene plasmon polariton atomic cavity (PPAC) THz detector in which intrinsic graphene plasmon absorption is enhanced through vertical cavity-assisted field redistribution. By incorporating a metallic back reflector beneath a silicon substrate of designed thickness, a Fabry-Pérot (FP) interference cavity is formed that positions the standing-wave antinode near the graphene plasmonic layer. Electromagnetic simulations reveal that the Fabry-Pérot cavity itself primarily redistributes the vertical electromagnetic field, thereby enhancing the local in-plane driving field responsible for intrinsic graphene plasmon excitation. Experimental measurements at the optimized cavity condition confirm a pronounced increase in plasmon-induced photothermoelectric response, consistent with the predicted absorption enhancement. As a result, the detector exhibits an approximately 30-fold increase in responsivity compared with the corresponding structure without the cavity, while maintaining a fast response time below 130 μs. The detector further enables discrimination of concealed polar and nonpolar liquids through continuous-wave THz imaging at 2.52 THz, achieving a discrimination speed 30-fold faster than that of conventional time-domain spectroscopy. This result highlights the potential of cavity-enhanced intrinsic plasmon absorption for compact, high-sensitivity, and high-speed THz photodetection.