Related Experiment Video
Updated: Jul 16, 2026

Experimental System of Solar Adsorption Refrigeration with Concentrated Collector
Published on: October 18, 2017
Experimental and AI-based prediction of a solar air heater with novel recycled interlocking channel fins
M Koraiem M Handawy1, Hisham Maher2, Hamada Mohamed Abdelmotalib2
1Mechanical Power Engineering and Energy Department, Faculty of Engineering, Minia University, Minia, 61519, Egypt. mohkoraiem@mu.edu.eg.
Abstract:
Solar air heaters are a promising method used for drying and heating applications owing to their low operating costs and simple design. However, these solar air heaters exhibit limited thermal performance due to the low heat transfer coefficient between the absorber and the air passing through the duct, resulting in a decrease in thermal and exergy efficiency. The present work aims to address this issue by conducting a single-pass solar air heater with novel recycled aluminum interlocking channel fins, along with using artificial intelligence approaches to predict thermal and exergy efficiencies. The novelty of the present study is represented by integrating a comprehensive experimental assessment using the 4E analysis (Energy, Exergy, Economic, and Environmental analysis) with the development and comparison of artificial neural network (ANN) and deep neural network (DNN) models to predict efficiency under different operating conditions. Two solar air heaters were tested: a conventional (C-SAH) and a modified finned (M-SAH) heater, under natural and forced convection conditions at mass flow rates of 0.0046, 0.008, and 0.012 kg/s. The study findings reveal a significant enhancement in the modified heater. Under natural convection conditions, the outlet air temperature increased from 78 °C to 84 °C for the modified heater. Regarding thermal efficiency, the modified heater exhibited the highest efficiency of 48.6% at a flow rate of 0.012 kg/s. Daily thermal efficiency also increased from 32.91% to 44.36% at the same flow rate. The exergy efficiency reached a maximum of 2.80% for the modified heater. The AI models achieved high predictive performance; the DNN model achieved an R² of 0.924 for thermal efficiency, while the ANN model performed best in predicting exergy efficiency with an R² of 0.971. These results demonstrate the reliability of the proposed AI models in predicting the performance of SAHs. Additionally, the use of recycled aluminum fins significantly enhances the performance of SAHs, offering a low-cost and sustainable tool for solar air heating applications. The integration of artificial intelligence methods enhances the design and operation of highly efficient solar air heater systems.
Related Concept Videos
Mechanisms of Heat Transfer II
Heating and Cooling Curves
For instance, the addition of heat raises the temperature of a solid; the amount of heat absorbed depends on the heat capacity of the solid (q = mcsolidΔT). According to thermochemistry, the relation between the amount of heat absorbed or released by a substance, q, and its...
Mechanisms of Heat Transfer I
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant heat.
Heat Engines
Whenever we consider heat engines (and associated devices such as refrigerators and heat pumps), we do not use the standard sign convention for heat and work. For convenience, we assume that the symbols Qh, Qc, and W represent only the amounts of heat transferred...
Mechanism of heat transfer
