Strain-Based Monitoring Methodology and Numerical Validation for the Evaluation of Transverse Connection Condition in...

Precast multi-girder bridges are widely utilized in highway infrastructure but are susceptible to transverse connection deterioration, which can lead to single-girder load-bearing failures. Existing structural health monitoring methods based on the correlation of total dynamic strain responses often fail to identify early-stage damage due to the static masking effect, where dominant, in-phase quasi-static components overshadow subtle, damage-sensitive dynamic features. To overcome this limitation, this paper proposes a novel condition indicator based on the correlation of high-frequency dynamic strain increments. An online streaming processing pipeline is developed, incorporating automated single-vehicle crossing event extraction, frequency-targeted signal decoupling, and indicator smoothing. Theoretical derivations on a dual-beam model demonstrate that the proposed indicator is a structural-intrinsic metric, exhibiting high sensitivity to joint stiffness while remaining robust against variations in vehicle weight and speed. Numerical simulations on an 8-slab finite element bridge model under stochastic traffic flow further verify the effectiveness of the framework. Results indicate that the proposed indicator can localize both progressive degradation and sudden brittle failures. Additionally, the method maintains reliability down to a signal-to-noise ratio of 30dB and robustness to hyper-parameter selection. While the current framework is established based purely on numerical validation and has not yet been tested using real bridge strain data, it shows numerical feasibility and provides a solid theoretical and algorithmic foundation for the automated condition evaluation of precast multi-girder bridges, supporting future field validation for both long-term maintenance and emergency response.