Development of Eco-Efficient Recycled Concrete Incorporating Steel Slag, Ground-Granulated Blast-Furnace Slag, and...

Reusing industrial byproducts to prepare recycled aggregate concrete (RAC) is a sustainable approach that can protect the ecological environment. This study tested the possibility of preparing an eco-efficient recycled concrete containing steel slag (SS), ground-granulated blast-furnace slag (GGBS), and polypropylene (PP) fibers to avoid resource waste and depletion and decrease CO₂ emissions. To this end, 12 mix proportions were designed to analyze the effects of SS, GGBS, and PP fibers on the macro- and micro-performances of the developed RAC. The experimental results showed that increasing the SS content decreased the RAC mechanical strength, whereas partially substituting SS with GGBS in the RAC improved the mechanical properties, especially at a later stage. Adding PP fibers to the RAC containing SS and GGBS significantly increased the splitting tensile strength. However, it had little effect on the compressive strength as the PP fiber content was less than 0.6%. The microscopic experiment revealed that adding GGBS promoted the degree of hydration of SS, reduced the Ca (OH)₂ content, made the ITZ structure more compact, and optimized the pore characteristics of the RAC. Furthermore, according to the raw materials and results of mechanical properties, a hybrid Genetic Algorithm/Artificial Neural Network (GA-ANN) technique was proposed to predict the compressive strength of the RAC containing SS, GGBS, and PP fibers. We found that the proposed GA-ANN model effectively predicts the compressive strength. The findings of this study demonstrate that preparing RAC incorporating SS, GGBS, and PP fibers is promising for the reuse of industrial byproducts and construction waste.