Influence of Cryogenic Cyclic Aging on Room-Temperature Mechanical and Tribological Performance of Polyimide-Based...

Cryogenic environments impose severe thermal and mechanical stresses on polymer components, yet the effects of long-term cryogenic cycling on their subsequent room-temperature performance remain insufficiently understood. This study investigated the influence of cryogenic cyclic aging on the mechanical and tribological behaviour of polyimide (PI)-based materials, including neat PI and composites reinforced with MoS₂, graphite, and/or PTFE. Repeated cryogenic cycling was followed by mechanical characterisation and tribological testing at 25 °C in air and vacuum. This work systematically compares neat and filled PI materials after cryogenic cyclic aging and correlates mechanical changes with transfer-film formation and wear behaviour. Cryogenic cyclic aging had only minor effects on weight and thermal stability but significantly altered the viscoelastic behaviour, increasing creep and residual strain, with variations depending on the polymer structure and filler content. Fracture toughness showed a statistically significant improvement only for PI2 (up to 93%). Changes in PI1, PI3, PI4, and PI5 fell within the experimental scatter and were interpreted as non-significant trends. In air, abrasive wear dominated in unreinforced PI, while graphite/PI composites exhibited adhesive wear and improved transfer film formation, reducing wear rates by up to 26%. In vacuum, the wear rate of aged graphite/PI increased by up to two orders of magnitude.