Related Experiment Video
Updated: Jul 16, 2026

Preparation of Monodomain Liquid Crystal Elastomers and Liquid Crystal Elastomer Nanocomposites
Published on: February 6, 2016
Organo-Montmorillonite (OMMT) Modified SiC/Hydrogenated Epoxy Micro-Nanocomposites for Enhanced Corona Aging
Haitao Hu1, Hailiang Dong1, Mingpeng He2
1Key Laboratory of Engineering Dielectrics and Its Application, Ministry of Education, College of Electrical and Electronic Engineering, Harbin University of Science and Technology, Harbin 150080, China.
Abstract:
The concentration of electric fields at the end region of stator bars in large generators can readily induce corona discharge. Under long-term operation, corona discharge may cause drift in the surface conductivity and nonlinear coefficient of anti-corona materials, thereby weakening their capability to homogenize the tangential electric field. In severe cases, this can lead to charring failure of the anti-corona material. To improve the electrical-parameter stability and surface morphological resistance to corona aging of silicon carbide (SiC)-based anti-corona materials under long-term corona exposure, epoxy-resin-based anti-corona materials were investigated in this study. Scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) were first employed to analyze the effects of corona aging on the microstructure and chemical structure of the anti-corona layer, thereby revealing its failure mechanism. Subsequently, the evolution of surface conductivity, nonlinear coefficient, and surface morphology of bisphenol A epoxy resin (EP)- and hydrogenated bisphenol A epoxy resin (H-EP)-based anti-corona materials during 120 h of corona aging was comparatively investigated. On this basis, different mass fractions of organically modified montmorillonite (OMMT) were introduced into the H-EP-based anti-corona material for synergistic modification. The OMMT used in this study had a particle size of approximately 5 μm and an interlayer spacing of 2.6 nm, and its lamellar morphology and dispersion state in the epoxy matrix were characterized by cross-sectional SEM. Meanwhile, the trap-regulation mechanism of the OMMT-modified anti-corona materials was analyzed using isothermal surface potential decay (ISPD). The results show that erosion of the epoxy resin matrix by corona discharge is the primary cause of internal conductive-pathway disruption and anti-corona layer failure. Compared with the EP-based material, the H-EP-based material exhibited better conductivity and nonlinear stability during aging, although a certain degree of drift still occurred. The incorporation of an appropriate amount of OMMT further improved the corona resistance of the material. Among the investigated samples, the material containing 1 wt% OMMT showed the best performance, with its conductivity stabilized within the range of 10-13-10-11 S, the lowest variation rate of 104.76%, a relatively stable nonlinear coefficient, and slight surface damage. The ISPD results indicate that the interfaces introduced by OMMT increase the deep-trap density and suppress carrier migration, thereby stabilizing the conductive network. Overall, the synergistic effect of the H-EP matrix and 1 wt% OMMT can effectively enhance the corona resistance of SiC-based anti-corona materials.
