Electrochemical Aptasensor Based on rGO@gold Nanoparticles for Neuropeptide Y Detection

Neuropeptide Y (NPY) is a stress-modulating neuropeptide and a promising biomarker for non-invasive assessment. Herein, a sensitive electrochemical aptasensor was developed on reduced graphene oxide/gold nanoparticle (rGO/AuNP)-modified screen-printed electrodes for selective NPY detection. A methylene blue (MB)-labeled NPY-specific aptamer was immobilized on the electrode surface through Au-S chemistry, and square-wave voltammetry (SWV) was used for signal readout. The rGO/AuNP-modified interface provided high conductivity and a large effective surface area, facilitating electron transfer and probe immobilization. Under optimized conditions, the aptasensor exhibited a linear detection range of 10-10,000 pg mL^-1 in PBS with a low detection limit of 1.17 pg mL^-1 and good linearity (R² = 0.991). In addition, the sensor showed satisfactory selectivity, reproducibility, and mechanical stability. Recovery tests in artificial sweat yielded recoveries of 91.8-107.8% with relative standard deviations below 5%, demonstrating good analytical accuracy in complex matrices. Combined with an agarose-hydrogel-assisted sampling interface and a reverse-iontophoresis-compatible wearable platform, this low-cost and facile sensing strategy provides a portable proof-of-concept approach for NPY analysis in artificial sweat and shows potential for future wearable-oriented biofluid monitoring.