Related Experiment Video
Updated: Aug 5, 2026

The Portable Chemical Sterilizer (PCS), D-FENS, and D-FEND ALL: Novel Chlorine Dioxide Decontamination Technologies for the Military
Published on: June 29, 2014
Implementation and Preliminary Evaluation of a Low-Cost Sodium Hypochlorite Shock Disinfection Protocol for Dental
Letícia Silveira Carneiro1, Maria Angélica Borba Vieira Ferreira2, Lísia Aparecida Costa Gonçalves3
1School of Dentistry, University of São Paulo, Ribeirão Preto 14040-904, SP, Brazil.
Abstract:
Background/Objectives: This exploratory study aimed to characterize the microbiological contamination of dental unit waterlines (DUWLs) and to conduct a preliminary evaluation of a 0.5% sodium hypochlorite shock treatment. Methods: Water samples from five dental units in a single teaching institution were collected from the air/water syringe and high-speed handpiece lines at four time points: baseline, immediately after a shock treatment, and 7 and 14 days post-treatment. The water supply source was also analyzed. The intervention consisted of a 15-min exposure to 0.5% sodium hypochlorite. Bacterial and fungal contamination was assessed using validated semi-quantitative microbial samplers, and key bacterial isolates were identified. Results: Baseline assessments revealed substantial bacterial contamination in most units (≥301 CFU/mL), despite minimal contamination in the water supply source (<10 CFU/mL). An immediate reduction in microbial counts was observed following the shock treatment for both bacteria and fungi counts; however, resilient species such as P. aeruginosa and the spore-forming B. cereus persisted, while K. pneumoniae was no longer detected. Bacterial levels increased again within 7 days in several units, while fungal contamination remained low at the follow-up. At 14 days, bacterial results were variable and inconsistent. In contrast, fungal contamination remained suppressed in most units throughout the follow-up period. Conclusions: The sodium hypochlorite shock treatment produced an immediate decrease in microbial load in DUWLs, but the findings suggest that its sustained effect on bacterial control may be limited. Given the small sample size and single-center design, these results should be interpreted cautiously. The study demonstrates the feasibility of implementing a structured DUWL monitoring and maintenance program using a simple, low-cost sodium hypochlorite protocol, providing a practical model for improving water quality and patient safety in dental clinics.
Related Concept Videos
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Hand hygiene
Hand washing...
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
