Experimental and CFD Investigation of Nanofluid-Based Cooling Performance in an Automotive Radiator Under Real...

In this study, the cooling performances of various nanofluids were compared under the operating conditions of a real automobile radiator, based on an internal combustion engine vehicle cooling system whose experiments had been previously completed. In the analyses, the radiator inlet fluid temperature was fixed at 70 °C, air inlet velocities were set to 6, 8, and 10 m/s, and fluid flow rates were taken as 17, 19, and 21 L/min. Under these conditions, the cooling capacities were evaluated for three different working fluids whose thermophysical properties were experimentally determined: 100% pure water, water-based 0.3% ZnO nanofluid, and water-based 0.3% ZnO + CuO hybrid nanofluid. Within the scope of this study, a Computational Fluid Dynamics (CFD) model was developed based on the aforementioned experimental parameters and validated with a maximum deviation of 6%. Using the validated model, additional CFD analyses were performed for water-based 0.3% Al₂O₃ and TiO₂ nanofluids, whose thermophysical properties were also experimentally determined, and their cooling performances were assessed. Based on the experimental and numerical results obtained, the highest cooling capacity was determined to be 20.8 kW in the 0.3% TiO₂ nanofluid, representing a 69.1% increase in cooling capacity compared to pure water. These findings clearly demonstrate that the use of nanofluids significantly enhances heat transfer performance in automotive cooling systems.