Junction Formation and Leakage Current Suppression in Planar High-Purity Germanium Detectors for Low-Energy X-Ray...

This study addresses the need for dark-current control and stable current response in planar high-purity germanium (HPGe) detectors for low-energy X-ray detection. A device fabrication strategy based on the coupled optimization of near-surface treatment, N/P junction formation, and guard-ring electrode design is proposed. Unlike previous studies that mainly focused on contact-layer fabrication, segmented electrode structures, low-noise readout, or response simulation, this work investigates low-damage near-surface construction, N-type and P-type contact-layer formation, and edge-related leakage-current regulation as an interconnected processing route. The relationship among the near-surface state, junction quality, electrode configuration, and edge-related leakage current is emphasized. Chemical mechanical polishing (CMP) reduced the surface roughness Sa of the HPGe crystal to 6.68 nm, providing a low-damage near-surface foundation for subsequent junction fabrication. On this basis, the optimized Li thermal diffusion process, namely 0.5 Å s^-1, 325 °C, and 5 min, formed an N-type contact layer with preserved lattice ordering and favorable electrical properties. B ion implantation combined with rapid thermal processing (RTP) achieved acceptor activation and implantation-damage recovery, and the condition with Rp = 198.1 nm showed relatively better structural recovery and electrical characteristics. After introducing the guard-ring electrode, the dark current of the device at -20 V decreased from 6.5 × 10^-9 A to 2.03 × 10^-9 A, and a stable switching current response was obtained under 12 keV monochromatic synchrotron X-ray irradiation. Geant4 simulations were further used as an auxiliary analysis to evaluate the effect of the guard-ring structure on the simulated response spectra and full-energy peak efficiency (FEPE) for low-energy X-rays. Overall, this study provides experimental evidence for process optimization of planar HPGe detectors with low dark current and stable low-energy current response.