Phase-Specific Assessment of Corrosion Susceptibility in Inconel 625 and SA508 Low-Alloy Steel Under Molten Chloride...

Nickel-based alloys are promising structural materials for molten salt systems; however, secondary-phase formation during long-term high-temperature exposure may introduce local corrosion susceptibility because secondary phases have compositions and redox stabilities distinct from the matrix. Here, we combine CALculation of PHAse Diagrams (CALPHAD)-based phase prediction with redox thermodynamic analysis to assess phase-specific corrosion susceptibility in Inconel 625 (IN625) and SA508 low-alloy steel under molten chloride conditions. Equilibrium phase constitutions at 1000 K were predicted using Thermo-Calc, and redox equilibrium potentials were calculated for representative-phase dissolution reactions of major metallic elements in each phase. The dominant α and γ phases in SA508 exhibited similar Fe-ionization potentials of -1.728 and -1.768 V vs. Cl2/Cl^-, respectively. In IN625, the γ matrix exhibited a Cr-ionization potential of -1.964 V vs. Cl2/Cl^-, whereas the P phase showed the most negative potential of -2.132 V vs. Cl2/Cl^-, 0.168 V more negative than the matrix, identifying the P phase as the primary local thermodynamic weak point. These results show that phase-specific metal-ionization susceptibility cannot be inferred solely from nominal alloy composition or matrix behavior. The proposed framework provides a thermodynamic screening approach for identifying susceptible secondary phases in multicomponent alloys under molten-salt conditions.