Physicochemical Characteristics of Microplastics Present in Sediments of the Veracruz Reef System National Park Using...

Microplastics (MP) are emerging pollutants found in the Veracruz Reef System National Park (PNSAV). They are widely distributed in the aquatic environment and are ingested by organisms either accidentally or because they are mistaken for food. In this article, the author analyses the physicochemical characteristics of reef sediments using visual identification, Nile Red (NR), scanning electron microscopy (SEM), and Energy Dispersive Spectroscopy (EDS) of microplastics found in sediments adjacent to reefs; this allowed us to determine their distribution within the PNSAV. A total of 687 microplastics per kilogram of dry sediment were quantified, including fibres (98.5%), films (1.4%), and fragments (0.01%). The predominant colour was transparent (60.2%), followed by blue (16%) and red (12%). Based on their MP distribution, the sites were classified into two groups: north and south. The sampling stations with the highest concentrations of MP are located in the group of reefs south of the PNSAV, with the Anegadilla Reef being the most affected station. SEM/EDS analyses revealed elemental spectra dominated by carbon and oxygen, which is consistent with the expected elemental composition of polymeric materials. Peaks of chlorine were detected in some MP particles, suggesting the possible presence of chlorinated polymers, such as polyvinyl chloride (PVC). In addition, elements such as titanium, silicon, and nickel were identified, which could be associated with inorganic particles adhering to the surface or with additives commonly incorporated during the manufacture of plastics such as polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), polystyrene (PS), and polyethylene terephthalate (PET). The presence of elements such as titanium and nickel were detected; these are found in additives used in the manufacturing of polymers.