Optimization of CNC milling parameters for YXR-7 tool steel using fuzzy MARCOS: A multi-response approach to improve...

This study presents an integrated optimisation method for CNC milling of heat-treated YXR7 tool steel using carbide cutting inserts under varying lubrication and process parameters. A full factorial experimental design comprising 27 runs was employed to assess the influence of depth of cut (dc), feed per tooth (ft), cutting speed (Cs), and nano-cutting fluid (Cf) on critical performance responses such as surface roughness (Ra), material removal rate (MRR), and tool wear rate (TWR). An advanced modelling through regression and ANOVA showed complex interactive and non-linear effects among process parameters. To effectively navigate these interdependencies, a novel hybrid decision-making model combining the Full Consistency Method (FUCOM) and fuzzy-MARCOS was employed. This multi-criteria decision-making (MCDM) method was described for uncertainties in machining performance and successfully ranked experimental alternatives based on their proximity to ideal performance. The optimal configuration (Experiment 21) accomplished a superior balance across all criteria, notably achieving a low surface roughness (Ra ≈ 0.42 µm) and TWR (~0.148 mm³/min) while maintaining a high MRR (~109.4 mm³/min). The proposed fuzzy-FUCOM-MARCOS method reveals high robustness, adaptability, and decision reliability, contributing a valuable strategy for precision machining of hard-to-cut steels. This work bridges experimental understandings with intelligent optimisation, fostering sustainable and high-performance manufacturing practices in the tooling industry.