Related Experiment Video
Updated: Aug 8, 2026

Combined Size and Density Fractionation of Soils for Investigations of Organo-Mineral Interactions
Published on: February 15, 2019
Mechanistic study on the influence of organic matter on soil compressive strength and nonlinear resistivity
Rui Lv1, Qiang Sun2, Ziyun Liang3
1College of Chemistry and Environmental Science, Kashi University, Kashi, 844000, P.R. China. lvrui318@163.com.
Abstract:
The incorporation of organic matter into loess can promote carbon sequestration while also significantly affecting the soil pore structure and strength properties. To investigate the effects of organic matter on the mechanical and physical properties of soil, as well as their interaction mechanisms, experimental studies were conducted on organic soils with different organic matter contents (0%-6%) and water contents (12%-24%). Meanwhile, the real-time evolution of resistivity during the mechanical tests was monitored. The results indicate that the addition of an appropriate amount of organic matter can improve the mechanical properties of loess, whereas the compressive strength decreases with increasing water content. As stress increased, the resistivity of the specimens decreased rapidly, and then remained relatively stable after the elastic stage until failure. Crack generation during the deformation process altered the conductive pathways within the organic soil and became an important factor influencing resistivity variation. These findings provide important theoretical support for soil remediation and land resource utilization in loess regions.
Related Concept Videos
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...
Elasticity in Concrete
Bulk Modulus
Soil Microbial Ecology
Relation Between Tensile Strength and Compressive Strength of Concrete
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by a...
