Sustainable Extraction and Structural Characterization of Cellulose from Spent Coffee Grounds via Combined Ultrasound...

The combined pretreatment of ultrasound irradiation, urea, and sodium hydroxide was explored to increase the extraction and delignification of cellulose from spent coffee grounds (SCGs), shortening the extraction time. The impacts of different experimental conditions, namely alkali concentration (5 vs. 10%), urea addition (0 vs. 3%), and ultrasound aid (30 min, 40 kHz, 150 W), on the physicochemical characteristics of the extracted cellulose were determined. The first characteristic of the raw biomass was its high lignin content (30.4%), necessitating a rigorous delignification process. To confirm this, samples were further analyzed by FTIR, XRD, TGA, and SEM. The successful elimination of non-cellulosic material, as indicated by the disappearance of the carbonyl stretch at 1730 cm^-1 and attributed to hemicellulose and pectin, was confirmed by FTIR. The XRD results revealed that while the individual application of ultrasound yielded the highest apparent crystallinity index (64.5% for sample B), the synergistic low-alkali combination with urea (sample F) resulted in a lower, controlled crystallinity index (56.2%). This indicated that the coexistence of urea and ultrasound induces significant fiber swelling and localized hydrogen-bond disruption, as well as highly efficient chemical purification. The thermal analysis revealed that all samples had high thermal stability with a maximum degradation temperature (T_max) between 316 and 322 °C, which can be used in composites. The process was visually confirmed by morphological analysis carried out under SEM, which revealed a progressive surface erosion of the compact lignocellulosic matrix into cellulose-rich samples treated with ultrasound.