Related Experiment Video
Updated: Aug 14, 2026

Synthesis of Soft Polysiloxane-urea Elastomers for Intraocular Lens Application
Published on: March 8, 2019
Structure-Property Relationships in Polyester-Based Polyurethane Foams with Varying Isocyanate Index for Footwear
Onder Albayrak1, Mehmet Ipekoglu2, Omer Uctu3
1Department of Mechanical Engineering, Faculty of Engineering, Mersin University, 33343 Mersin, Türkiye.
Abstract:
Polyurethane (PU) foams are widely used in footwear midsoles because their cellular structure, density, impact-attenuation capability, and mechanical durability can be tailored through formulation design. In this study, polyester-based PU foams were prepared at different isocyanate indices while keeping the main formulation components constant, and their structure-property relationships were evaluated under midsole-relevant conditions. The samples were characterized by density, tensile and compression testing, standard abrasion wear testing, water absorption, temperature-dependent flexural resistance, Fourier transform infrared (FTIR), scanning electron microscope (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis/derivative thermogravimetry (TGA/DTG), and dry/wet tribometry. FTIR results confirmed the formation of urethane/urea-related linkages and the absence of detectable residual isocyanate groups, whereas DSC indicated broad heat-flow events typical of segmented PU systems, including high-temperature events that should be interpreted together with TGA. TGA/DTG analysis showed similar initial degradation behavior for all formulations; however, the 138-index sample exhibited the highest t90% value, indicating improved high-temperature mass retention. Tribometric tests revealed an environment-dependent coefficient of friction (COF) response: the 138-index sample exhibited the lowest steady-state COF under dry sliding (μss = 0.211), whereas the 113-index sample showed the lowest COF value under wet sliding conditions (μss = 0.176). Overall, among the three stable formulations investigated, the 113-index formulation exhibited the most balanced multi-property performance. These results suggest that, within the tested formulation range, midsole-relevant PU foam performance is associated with a balance of formulation characteristics rather than simply with increasing the isocyanate index.
More Related Videos
07:02The Preparation and Properties of Thermo-reversibly Cross-linked Rubber Via Diels-Alder Chemistry
Published on: August 25, 2016
07:56Preparation of Carbon Fiber and Bamboo Fiber Reinforced Poly (butylene Adipate-co-terephthalate) Foams by Supercritical Carbon Dioxide Foaming
Published on: October 10, 2025
Related Concept Videos
Polymer Classification: Stereospecificity
Classification and Mechanical Properties of Synthetic Polymers
Molecular Weight of Step-Growth Polymers
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...
Polymer Classification: Architecture
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the polymer...
Polymers: Molecular Weight Distribution