Related Experiment Video
Updated: Aug 14, 2026

Disentangling High Strength Copolymer Aramid Fibers to Enable the Determination of Their Mechanical Properties
Published on: September 1, 2018
Experimental Exploration of Properties and Characterization of Nerium oleander L. Plant Stem Fibers and Their Polymer
M Ramesh1, M Tamil Selvan2, A Felix Sahayaraj3
1Department of Mechanical Engineering, Sri Shanmugha College of Engineering and Technology, Salem 637304, Tamil Nadu, India.
Abstract:
This study aimed to investigate the physicochemical properties and composites of a novel cellulosic fiber extracted from Nerium oleander L. plant stem. Nerium oleander fibers (NOFs) were separated from mature oleander plants using a microbial degradation technique, and their composites (NOFCs) were fabricated using a compression molding technique. The chemical composition, physical and thermal behavior of NOFs, and mechanical and water absorption properties of NOFs and NOFCs were investigated. The findings show that NOFs have a cellulose content of 57%, hemicellulose content of 13%, lignin content of 16%, density of 1.46 g/cc, and crystallinity index (CI) of 57.14%. The results further revealed that NOFs had a tensile strength of 438 MPa and a strain rate of 1.8%, whereas NOFCs had a maximum tensile strength of 58.42 MPa. NOFs can withstand temperatures up to 357 °C, according to a thermogravimetric study, and the functional groups were analyzed using Fourier-transform infrared (FTIR) spectroscopy. Scanning electron microscopy (SEM) studies showed that the surface morphology and fractured surfaces of the NOFs and their composites were smooth and circular in cross-section.
More Related Videos
Related Concept Videos
Classification and Mechanical Properties of Synthetic Polymers
Olefin Metathesis Polymerization: Overview
Ruthenium-based Grubbs catalyst is the most commonly used catalyst for olefin metathesis polymerization. Grubbs catalyst consists of a...
Polymers
Polymer Classification: Architecture
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the polymer...

