Carbon Nanotube-Based Gas Sensors: Sensing Mechanisms, Functional Interfaces, Gas-Specific Performance, and...

Carbon nanotubes (CNTs) have become one of the most widely investigated nanomaterials for gas sensing because their nearly one-dimensional geometry, large surface-to-volume ratio, hollow structure, and tunable metallic or semiconducting character allow trace adsorption events to be transduced into measurable electrical signals at or near room temperature. This review summarizes CNT-based gas sensors from a system-oriented perspective, linking four interconnected topics: (i) CNT structure, synthesis, and film/device fabrication; (ii) sensing mechanisms, including charge transfer, Schottky-barrier modulation, carrier-lifetime effects, and field-enhanced ionization; (iii) functional interfaces based on noble metals, metal oxides, conducting polymers, and graphene derivatives; and (iv) gas-specific and flexible/wearable device performance. Particular attention is given to recent room-temperature and mechanically compliant CNT-film sensors fabricated on polymer, cellulose, paper, textile, and mask substrates. Rather than cataloguing only individual response values, this review compares representative devices in terms of target gas, operating condition, sensitivity, recovery strategy, selectivity, humidity tolerance, and wearable relevance. The review concludes by discussing remaining challenges in reproducibility, selectivity, humidity compensation, recovery, power consumption, and standardization, and by outlining future directions toward robust, scalable, and intelligent CNT-enabled sensing systems.