Machine Learning-Assisted Square-Spot Laser Surface Reshaping for Sidewall Roughness Control of LDED Ti-6Al-4V...

Laser directed energy deposition (LDED) can fabricate Ti-6Al-4V thin-walled structures efficiently, but the deposited sidewalls usually contain adhered particles, layer steps, and waviness that limit surface quality. This study combined square-spot laser surface reshaping with machine learning-assisted parameter design to control sidewall roughness. Sixteen single-factor experiments were first conducted to clarify the effects of laser power, scanning speed, spot overlap ratio, and scan number. An 80-sample dataset was then established to train and compare random forest (RF), support vector regression (SVR), and eXtreme Gradient Boosting (XGBoost) models, and SHapley Additive exPlanations (SHAP) were used to interpret feature contributions. RF showed the best predictive performance, with R² = 0.940 and RMSE = 1.760 μm, and was coupled with Bayesian optimization (BO) for inverse parameter design. For a target arithmetic mean roughness (Ra) of 5 μm, the optimized condition was 500 W, 2.57 mm/s, 48.09% overlap, and five scans. The predicted Ra was 5.02 μm, while the validation experiment yielded 5.76 μm, reducing the initial roughness from 28.98 μm by 80.1%. These results demonstrate that interpretable machine learning can support target-driven square-spot laser reshaping for LDED Ti-6Al-4V thin-walled structures.