Comparative Study on Dynamic Mechanical Behavior and Power-Law Versus Johnson-Cook Constitutive Models of Quenched...

This study systematically investigates the dynamic mechanical behavior and constitutive modeling of low-temperature quenched and tempered 42CrMo steel under high-strain-rate and high-temperature conditions. Dynamic compression tests were performed using a split Hopkinson pressure bar (SHPB) system over a strain rate range of 460-6450 s^-1 and a temperature range of 25-800 °C. The results show that the flow stress of quenched 42CrMo steel exhibits significant strain hardening and temperature softening effects, while its strain rate sensitivity is observed to be relatively low, especially under ultra-high-strain-rate conditions. Based on the experimental data, both the Power-Law and Johnson-Cook constitutive models were established. A hardness-based temperature softening coefficient was introduced to convert the experimental stress-strain curves into isothermal stress-strain curves, thereby effectively decoupling the coupled effects of strain rate and temperature. Error analysis indicates that the Power-Law model yields an average fitting error of 1.98%, which is superior to that of the Johnson-Cook model (3.23%), suggesting that the Power-Law model is more suitable for describing the dynamic mechanical behavior of low-temperature quenched and tempered 42CrMo steel. The findings of this study provide a reliable constitutive basis for numerical simulations of low-temperature quenched and tempered 42CrMo steel under extreme thermomechanical coupling conditions, such as high-speed cutting and impact forming.